High temperature fans (200°C)

  • Dynair PQ-L Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1–9–12: mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard.
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Quick View
  • Dynair PR-L Backward curved blade centrifugal fans for clean or slightly dusty air

    Construction

    • Volute casing in steel sheet , protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Quick View
  • Dynair PS-L Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1–9–12: mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Quick View
  • Dynair PR-Q AT Backward curved blade centrifugal fans for clean air or slightly dusty air with t from 100 to 200°C

    Construction

    • Volute casing with quadrangular frame, manufactured in galvanized steel sheet and protected against atmospheric agents with epoxy finish
    • Single inlet, backward curved wheel with high efficiency, manufactured in galvanized steel sheet and die-cast aluminium hub
    • Execution 5 (impeller directly coupled to fl anged motor), rotation RD
    • Asynchronous three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/30/CE, LVD 2014/35/UE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Inlet and outlet protection guard manufactured according to UNI 12499 norm and protected against atmospheric agents
    • Inlet/outlet flexible connectors
    • Antivibration supports
    • Inlet/outlet counterflange
    • Self transformer or inverters speed controllers

    CATALOGUE

    ACCESSORIES

    Quick View
  • Dynair TACC Compact axial roof fans

    Construction

    • Fixing base in galvanized steel sheet
    • Casing in steel sheet, epoxy coated
    • Axial impeller with aerofoil profile blades in glass reinforce polyamide and die-cast aluminium hub, balanced according ISO 1940. Variable pitch angle in still position with setting means
    • Weatherproof upper cover in fiberglass
    • Air flow from motor to impeller
    • Protection guard on outlet side, in steel rod, manufactured according to norms UNI 10615 and weatherproof
    • Asynchronous three-phase or single-phase motor according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F
    • All suitable to S1 service (continuous working at constant load)

    Accessories

    • Inlet gravity shutter. (SA)
    • Counter-base to be walled up (CB)
    • Support base and Reduction (BA and RD)
    • Support base/Silenced reduction (PB)
    • Motor side protection grid (CCrc)

    CATALOGUE

    Quick View
  • Dynair CCB Bifurcated ducted axial fans

    Construction

    • Stainless steel AISI 304 casing, with airtight motor housing, with fixing flanges manufactured according to ISO 13351
    • High performance axial impeller with aerofoil profile blades and hub in diecast aluminium, balanced according ISO 1940. Variable pitch angle
    • Execution 4 (with impeller directly coupled to motor with feet) and airflow from impeller to motorAsynchronous three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/34/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Suitable to S1 service (continuous working at constant load).

    Accessories

    • Flat protection guard (CCr)
    • Flexible connectors (CCga)
    • Support feet (CCst)
    • Inlet/outlet bell mouth (CCbo)
    • Silencers, with and without pod, in three lengths (CCsa and CCsb)
    • Counter flange (Ccf)
    • Counter flange with collar (CCfc)
    • Anti-vibration mounts.

    CATALOGUE

    ACCESSORIES

    Quick View
  • Dynair S-CUBE KAT Backward curve centrifugal box fans – High temperature for industrial kitchens

    Construction

    • Aluminium frame with double skin sound absorbing insulated panels removable from the impeller side
    • Motor external to the stream, B5 execution directly coupled to the impeller
    • Sound absorbing and self-extinguishing material between the steel sheet layers of the panels
    • Galvanized steel sheet backward curved impeller dynamically balanced according to ISO1940
    • Punched mounting feet for an easy handling and fixing
    • Asynchronous squirrel cage three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, Class F Suitable to S1 service (continuous running with constant load)

    Accessories

    • Water-proof protection cover
    • Anti-vibration supports
    • Floor support feet
    • Round spigot inlet cone
    • Square to round outlet adaptor
    • Flexible connector (on demand from model 35, yo be coupled with round spigot inlet cone or square to round outlet adaptor)
    • Service switch IP67
    • Grease collector tray

    CATALOGUE

    ACCESSORIES

    Quick View
  • Dynair FC AT – FC 2V AT Single or dpouble speed centrifugal roof fans for air temperature up to 200°C

    CONSTRUCTION

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI EN 12499
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Upper cover in aluminium, with appropriate slots for motor cooling
    • Asynchronous three-phase motor or singlephase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked,
      IP 55, class F

    ACCESSORIES

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Counterbase (CB)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)
    • Flat protection guard (CCr)

    CATALOGUE

    Quick View
  • Dynair DIC AT Forward curved blade centrifugal fans for air temperature up to +150°C

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet, single width forward curved impeller (sirocco type), in galvanized steel sheet
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Standard orientation LG270°
    • Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC 100 T and M with motor shape B14, IP44, class B.

    Accessories

    • Inlet and outlet protection guard according to UNI 12499 rules and protected against atmospheric agents
    • Motor support in steel sheet epoxy painted.

    CATALOGUE

    Quick View