• Mounting plate made from galvanized steel.
• Protection guard made from sqaure micro-pressed steel sheet, protected against the elements (model 350 features a guard made out of drawn steel wire). Manufactured according to the EN ISO 12499 standard.
• High efficiency, backward curved blade impeller made from galvanized steel sheet, with low noise levels, statically and dynamically balanced statically and dynamically according to ISO 1940 standard.
• Upper cover made out of ABS plastic, with appropriate cooling slots for the motor.

Motor:        

• Asynchronous single- or three-phase motor, CE marked, with IP55 grade protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
• Suitable for S1 Service (continuous operation at constant load).

Accessories:

• Backdraught gravity shutter (TS)
• Silencer (GR)
• Counterbase (CB)
• Mounting plate for corrugated roofs (BA)
• Inlet protection guard (RA)
• Service switch
• Acoustically insulated support base(PB)
• Flat protection guard (CCr)

Also available in a 60Hz version, and an ATEX certified version for potentially flammable or explosive environments (See: ATEX Fans).

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCP-V single-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protection guard made from sqaure micro-pressed steel sheet, protected against the elements (model 350 features a guard made out of drawn steel wire). Manufactured according to the EN ISO 12499 standard.
• High efficiency, backward curved blade impeller made from galvanized steel sheet, with low noise levels, statically and dynamically balanced statically and dynamically according to ISO 1940 standard.
• Upper cover made out of ABS plastic, with appropriate cooling slots for the motor.

Motor:        

• Asynchronous single- or three-phase motor, CE marked, with IP55 grade protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
• Suitable for S1 Service (continuous operation at constant load).

Accessories:

• Backdraught gravity shutter (TS)
• Silencer (GR)
• Counterbase (CB)
• Support base corrugated roofs (BA)
• Inlet protection guard (RA)
• Service switch
• Acoustically insulated support base(PB)
• Flat protection guard (CCr)

Also available in a 60Hz version, and an ATEX certified version for potentially flammable or explosive environments (See: ATEX Fans).

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCP single-speed centrifugal roof fans with horizontal discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
• Backward curved blade impeller made from galvanized steel, designed for high efficiency and low noise operation, balanced statically and dynamically according to the ISO 1940 standard.
• Asynchronous, double polarity three-phase motor, CE marked,equipped with IP55 grade protection, Class F insulation, compliant with the following standards: IEC 60034, Iec 60072, EMC 2014/30/UE, LVD 2014/35/UE.
• Upper cover made from ABS plastic, featuring cooling slots for the motor.

Accessories:

• Backdraught gravity shutters (TS)
• Silencer(GR)
• Mounting plate for corrugated roofs (BA)
• Inlet protection guard(RA)
• Service switch
• Silenced mounting plate (PB)

Special versions:

• AT version: horizontal discharge version, made for constant operation in environmnents with air temperatures up to 200°C).
  • • • (See: High temperature fans)
• HT version: horizontal discharge, single-speed version made for heat and smoke extraction (F400).
  • • • (See: Smoke extraction fans)
• ATEX version: ATEX certified, single-speed version, compliant with directives 94/9/CE and 2014/34/UE.
  • • • (See: ATEX Fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCV 2V dual-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
• Backward curved blade impeller made from galvanized steel, designed for high efficiency and low noise operation, balanced statically and dynamically according to the ISO 1940 standard.
• Asynchronous, double polarity three-phase motor, CE marked,equipped with IP55 grade protection, Class F insulation, compliant with the following standards: IEC 60034, Iec 60072, EMC 2014/30/UE, LVD 2014/35/UE.
• Upper cover made from ABS plastic, featuring cooling slots for the motor.

Accessories:

• Backdraught gravity shutters (TS)
• Silencer(GR)
• Mounting plate for corrugated roofs (BA)
• Inlet protection guard(RA)
• Service switch
• Silenced mounting plate (PB)

Special versions:

• AT version: made for constant operation in environmnents with air temperatures up to 200°C)
  • • • (See: High temperature fans)
• HT version: single-speed version made for heat and smoke extraction (F400)
  • • • (See: Smoke extraction fans)
  • ATEX version: ATEX certified, single-speed version, compliant with directives 94/9/CE and 2014/34/UE
    • • (See: ATEX Fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair FC 2V dual-speed centrifugal roof fans with horinzontal discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protection guard made from drawn steel rods, manufactured in compliance with UNI 10615:11997 regulations.
• Low noise, highly efficient backward curved blade impeller made from galvanized steel.
• Single- or three-phase external rotor motor, tropycalized, equipped with internal thermal protection and IP44 grade ingress protection, with the 20 and 25 models featuring Class B, the 31-40 models Class F insulation.
• Upper cover made from aluminium.

Accessories:

• • Backdraught gravity shutter
  • Silencers (GR)
  • Counter base to be walled up (CB)
  • Mounting plate for corrugated roof coverings(BA)
  • Service switch
  • Speed regulators
  • Support base with noise and vibration dampening(PB)– not available for the 20 model
  • Flat protection guard (CCr)

For any further questions, feel free to contact KOMPEL Kft.

The post Dynair REA centrifugal roof fans with horizontal discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
• High efficiency, low noise, backward curved blade impeller made from galvanized steel sheet, statically and dynamically balanced statically and dynamically according to the  ISO 1940 standard.
• Asynchronous single- or three-phase motor, CE marked, with IP55 protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.  Suitable for S1 Service (continuous operation at constant load).
• Upper cover made from ABS plastic, featuring cooling slots for the motor.
• Outer deflector made from high-strength ABS.

Accessories:

• Backdraught gravity shutters(TS)
• Silencer(GR)
• Mounting plate for corrugated roofs (BA)
• Inlet protection guard(RA)
• Service switch
• Acoustically insulated support base(PB)

Special versions:

• AT version: Horizontal discharge version, suitable for conveying hot air in continuous service.(up to 200°C).
  • • • (See: High temperature fans)
• HT version: High temperature, horizontal discharge version for emregency smoke extraction in case of fire.
  • • • (See: Smoke extraction fans)
• ATEX version: ATEX certified version,  compliant with directives 94/9/CE and 2014/34/UE.
  • • • (See: ATEX Fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCV single-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protection guard made from drawn steel rods, manufactured in compliance with UNI 10615:11997 regulations.
• Low noise, highly efficient backward curved blade impeller made from galvanized steel.
• Single- or three-phase external rotor motor, tropycalized, equipped with internal thermal protection and IP44 grade ingress protection, with the 25 model featuring Class B, the 31-40 models Class F insulation.
• Outer deflector made from ABS plastic.

Accessories:

• Backdraught gravity shutter
• Silencers (GR)
• Counter base to be walled up (CB)
• Mounting plate for corrugated roof coverings(BA)
• Service switch
• Speed regulators
• Support base with noise and vibration dampening(PB)
• Flat protection guard (CCr)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REV centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
• High efficiency, low noise, backward curved blade impeller made from galvanized steel sheet, statically and dynamically balanced statically and dynamically according to ISO 1940 standards.
• Asynchronous single- or three-phase motor, CE marked, with IP55 protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Suitable for S1 Service (continuous operation at constant load).
• Upper cover made from ABS plastic, featuring cooling slots for the motor.

Accessories:

• Backdraught gravity shutters(TS)
• Silencer(GR)
• Support base for corrugated roofs (BA)
• Inlet protection guard(RA)
• Service switch
• Acoustically insulated support base(PB)
• Aluminium cover

Special versions:

• AT version: Suitable for conveying hot air in continuous service (up to 200°C).
  • • • (See: High temperature fans)
• HT version: High temperature version for emregency smoke extraction in case of fire (F400).
  • • • (See: Smoke extraction fans)
• ATEX version: ATEX certified version, compliant with directives 94/9/CE and 2014/34/UE.
  • • • (See: ATEX Fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair FC single-speed centrifugal roof fans with horizontal discharge appeared first on Dynair.hu.