Anticorrosion fans – Dynair.hu https://www.dynair.hu Dynair ventilation Mon, 22 Aug 2022 12:30:42 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.dynair.hu/wp-content/uploads/2022/01/favicon.jpg Anticorrosion fans – Dynair.hu https://www.dynair.hu 32 32 Dynair PR-AC Centrifugal fans in plastic material https://www.dynair.hu/termek/dynair-pr-ac-centrifugal-fans-in-plastic-material/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8148/ The PR-AC series of fans were deisgned specifically to convey smoke and corrosive vapours, or high humidity gases with fluid particles. Designed to operate with low noise, and high efficieny  between -15°C and +70°C, the PR-AC features a centrifugal, backward curved fan, manufactured with great precision, in order to last a long time. The recyclable materials of the PR-AC fan make it easily disposable once its lifetime is finished.

Airflow: up to 17 000 m3/h
Max pressure rise: 2 100 Pa.
Max operating temperature: 60 °C.

CATALOGUE

The post Dynair PR-AC Centrifugal fans in plastic material appeared first on Dynair.hu.

]]> Construction:

  • Polyethylene volute casing.
  • Single inlet impeller, made out of polypropylene, with backward curved blades, and an aluminium hub (protected from the vapours and corrosive gases).
  • Steel motor support, coverd in epoxy paint.
  • Single-, or three-phase asynchronous motors, with IP55 protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE. Suitable for continuous „S1” service at constant load. Available in B3 or B5 standard shapes.

Accessories:

  • Inlet and outlet protection guard, compliant with the UNI 10615 standard.
  • Anti-vibration joint made out of PVC, on both the inlet and outlet sides.
  • Gravity shutter.
  • Manual setting shutter.

Available upon request:

  • Version with casing made of Polypropylene (PR-AC/PP)
  • Version with casing made of PER, anti-static and self-extinguishing polyethylene (PR-AC/PER)
  • Stainless steel AISI304 motor support.
  • ATEX version, compliant with directives 94/9/CE and 2014/34/UE.

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-AC Centrifugal fans in plastic material appeared first on Dynair.hu.

]]> Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air https://www.dynair.hu/termek/dynair-pr-l-inox-backward-curved-blade-centrifugal-fans-for-clean-or-slightly-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8145/ These fans are the stainless steel versions of the PR-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PR-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can be used in other industrial processes as well, such as baker ovens, spray booths, boilers, silos, cooling systems, etc. PR-L fans can convey clean air, smoke or even slightly dusty air with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  at a low pressure.

Airflow: up to 105 000 m3/h
Max static pressure buildup: 5 000 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PR-L/AT high temp version
PR-L ATX ATEX version

CATALOGUE

The post Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pv-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8143/ These fans are the stainless steel versions of the PV-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PV-L series of fans are designed  for industrial or commercial applications, such as pneumatic transportation, suction and filtering processes in foundries, cement factories, mines, marble-, ceramics-, or glass factories, furnaces, etc.  PV-L fans can convey clean or slightly dusty air and smoke, with temperatures between -20°C and +80°C  in standard configurations, and up to 150°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 6 500 m3/h
Max static pressure buildup: 6 800 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PV-L/AT high temp version
PV-L ATX ATEX version

CATALOGUE

The post Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pq-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8141/ These fans are the stainless steel versions of the PQ-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PQ-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PQ-L fans can convey somke, or slightly dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 120 000m3/h
Max static pressure buildup: 14 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PQ-L ATX ATEX anti-explosion version

CATALOGUE

The post Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-ps-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8144/ These fans are the stainless steel versions of the PS-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PS-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PS-L fans can convey somke, or very dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and medium  pressure.

Airflow: up to 42 000 m3/h
Max static pressure buildup: 5 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PS-L/AT high temp version
PS-L ATX ATEX version

CATALOGUE

The post Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair DIC-INOX Centrifugal fans in stainless steel https://www.dynair.hu/termek/dynair-dic-inox-centrifugal-fans-in-stainless-steel/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8147/ The centrifugal fans of the DIC INOX series are designed to convey corrosive smoke,  between -20°C and +80°C. These fans are ideal for industrial applications where small air volumes and high pressures are required. The impeller is coupled directly to the motor, the case is easily adjustable in 45° intervals without dismantling the whole device.

Airflow: up to 1 500 m3/h
Max pressure rise: 1 400 Pa
Max operating temperature: 80 °C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair DIC-INOX Centrifugal fans in stainless steel appeared first on Dynair.hu.

]]> Construction:

  • Volute, impeller and flanges all made out of AISI 304 stainless steel sheet.
  • Single inlet forward curved impeller directly attached to the motor (execution 5).
  • Standard orientation LG 270°.
  • Single-, or three-phase asynchronous B35 shaped motors with IP55 grade protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.  The DIC INOX 100T and M models feature a B14 shaped motor with IP44 grade protection and class B insulation.

Accessories:

  • Inlet and outlet protection guard, manufactured according to the UNI12499 standard.
  • Steel motor support, protected against atmospheric agents by epoxy paint.

Available upon request:

Installation:

  • Centrifugal fans with forward curved blades must always be installed into ducted systems, with adeqaute resistance (e.g. setting shutters), so the airflow limits the drawn current to the value specified by the motor rating label.

For further details, feel free to contact KOMPEL Kft.

The post Dynair DIC-INOX Centrifugal fans in stainless steel appeared first on Dynair.hu.

]]>