• Remarkably high thermal efficiency ceramic heat exchanger, with up to 90% heat recovery.
• Ideal for residential applications, where a constant temperature is required in all seasons.
• Recommended to be installed in pairs, maximizing the system efficiency in single-room or multi-room use cases.
• Featuring direct discharge, installable into 300 to 500 mm thick walls. (Optionally available for 220-1000 mm walls as well.
• Suitable for conveying clean air up to 50°C.
• Very slim and compact front cover, with an aesthetic design.
• Equipped with G3 class washable and replaceable filters, on both intake and exhaust sides.
• “Free-cooling” mode without heat recovery, and anti-freeze mode.
• Complaint with EN 60335-2-80, LVD 2014/35/UE és EMC 2014/30/UE international standards.
• IPX4 grade protection.
• CE marked.

Available models:

• REC DUO 100
  • Continuous operation at idel speed (selectable between 2 at installation).
  • Can be turned into extraction-only mode via the RLS remote (remote sold separately).
  • Maximum fan speed can be set with a timer between 0 and 30 minutes, after which the device automatically returns to idle speed.
• REC DUO 100 MHY
  • A REC DUO 100 equipped with a built-in moisture sensor, which automatically sets the ventilation level accordingly; when the predetermined level is reached it turns up the fan speed.
• REC DUO 100 PLUS RC
  • This version comes with a remote, giving the customer access to the following 7 options:
    • 0 – On/Off
    • 1 – Continuous ventilation at idle speed.
    • 2 – Middle fan speed.
    • 3 –  High fan speed.
    • 4 – Timer for extra high fan speed.
    • 5 – Sleep mode (8 hours of very low noise operation)
    • 6 – Ventilation mode (extraction only / induction only)
    • 7 – “free-cooling mode” (ventilation without heat recovery)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC DUO 100 – Decentralized Heat Recovery Unit appeared first on Dynair.hu.

• Great energy savings thanks to the EC motors.
• Built-in “by-pass” and antifreeze modes.
• Equipped with 3 filters, air from both directions is cleaned before coming in contact with the heat exchanger.
• Easy maintenance and cleaning: both the filters and the heat exchanger are removable for cleaning purposes.
• Compliant with the following international standards: EN 60335-2-80,  B.T. 2014/35/UE, és EMC 2014/30/UE.
• Tubular heat exchanger, with separate channels for optimal hygiene.
• 3 feedback LEDs, for indication of ventilation mode or any malfunctions.

Available versions:

• REC Smart+ RC
  • Comes with a regular button remote for the adjustment of the following ventilation settings:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
• REC Smart+ TC
  • Comes with a “Touch Panel” remote, with a color screen, which allows manual or automatic management of the following settings during weekly programming:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
    • Humidity value, above which the device automatically switches to a higher fan speed.
    • Ventilation modes (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SMART+ Decentralized HRU with Touch Panel or remote controller appeared first on Dynair.hu.