Dynair REC SMART+ Decentralized HRU with Touch Panel or remote controller

Construction

  • High energy saving thanks to EC motors
  • Integrate by-pass and antifreeze functions.
  • Provided with 3 filters: the air is filtered in both flows before entering the heat exchanger.
  • Easy maintenance and cleaning: filters and heat exchanger are removable and washable.
  • Comply with EN 60335-2-80, B.T. 2014/35/UE, EMC 2014/30/UE.

CATALOGUE

RECSmart+ is a decentralized HRU with high efficiency exchanger (75%) and integrated humidity control.

It is ideal for installation in wet rooms like bathrooms and kitchens and very easy to install: no ducting system or heavy masonry required as a hole of ø 100 mm is sufficient.
It is thus particularly indicated for refurbishment and energy requalification and offers a drastic solution to humidity and condensate problems.

It is available in a range of 3 models corresponding to 3 different duct lengths (400, 500, 600 mm), with a unique duct diameter 100 mm all available in 2 versions:

REC Smart RC
The model is supplied with a remote radio controller.
The ventilation unit is provided with 3 LED that indicate the operation modality, including the sleep mode and the extraction mode, as well as the indication of potential anomalies.
Through the remote radio controller it is possible to manage the following functions:

  • On/Off
  • The Speed/ventilation level regulation
  • The Sleep modality that allow to have the unit running silently at low speed during the night (the boost function is excluded)
  • The post-ventilation function (Timer function, adjustable from 0 to 30 minutes) to delay the switching of the unit at the minimum speed

REC Smart TC
The model is supplied with a remote Panel Touch controller with coloured screen.
The ventilation unit is provided with 3 LED that indicate the operation modality, including the sleep mode and the extraction mode, as well as the indication of potential anomalies.
The Touch Panel allows to manually or automatically manage (through the weekly programming) the following functions:

  • The Speed/ventilation level regulation
  • The ventilation modality (by-pass function, free-cooling, only extraction, only immission)
  • The threshold humidity level over which the unit increases its speed
  • The post-ventilation function (Timer function, adjustable from 0 to 30 minutes) to delay the switching of the unit at the minimum speed)
  • The Sleep modality that allow to have the unit running silently at low speed during the night (the boost function is excluded)