Backward curved blade centrifugal fans for clean air – Dynair.hu https://www.dynair.hu Dynair ventilation Fri, 19 Aug 2022 09:04:27 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.dynair.hu/wp-content/uploads/2022/01/favicon.jpg Backward curved blade centrifugal fans for clean air – Dynair.hu https://www.dynair.hu 32 32 Dynair PR-Q AT Backward curved blade centrifugal fans for clean air or slightly dusty air with t from 100 to 200°C https://www.dynair.hu/termek/dynair-pr-q-at-backward-curved-blade-centrifugal-fans-for-clean-air-or-slightly-dusty-air-with-t-from-100-to-200c/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8163/ The PR-Q series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. PRL fans can convey clean air, smoke or even slightly dusty air with temperatures between +100°C and +200°C  in standard configurations, and up to 300°C in special versions. The main characteristic of the PR-Q series is the rectangular construction, which allows the fan to be positioned in four different orientations (0°-90°-180°-270°) without any additional components. The lack of protruding motor support allows for a more compact design. Available in 6 sizes.

Airflow: up to 9 100 m3/h
Max static pressure buildup:  990 Pa
Max operating temperature: 100°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PR-Q HT version for smoke extraction

CATALOGUE

ACCESSORIES

The post Dynair PR-Q AT Backward curved blade centrifugal fans for clean air or slightly dusty air with t from 100 to 200°C appeared first on Dynair.hu.

]]> Construction:

  • Volute casing with rectangular frame, made from galvanized steel sheet, coated in epoxy.
  • Single inlet, high efficiency backward-curved galvanized steel impeller with a die-cast aluminium hub.
  • Only available in Execution 5, with impeller coupled directly to the flanged motor. (Rotation:RD)
  • Asynchronous three-phase motor, with IP55 grade protection and Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Upon request:

Accessories:

  • Inlet and outlet protection guard manufactured according to UNI 12499 standard and protected against atmospheric agents.
  • Inlet/outlet flexible connectors
  • Anti-vibration supports
  • Inlet/outlet counter flange
  • Speed controller (available in  autotransformer or inverter version)

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-Q AT Backward curved blade centrifugal fans for clean air or slightly dusty air with t from 100 to 200°C appeared first on Dynair.hu.

]]> Dynair PS-L Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-ps-l-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8122/ The PS-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PS-L fans can convey somke, or very dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and medium  pressure.

Airflow: up to 42 000 m3/h
Max static pressure buildup: 5 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PS-L/AT high temp version
PS-L/INOX stainless steel version
PS-L ATX ATEX version

CATALOGUE

The post Dynair PS-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
  • Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
  • Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motors, with IP55 Class F protection, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PS-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PR-L Backward curved blade centrifugal fans for clean or slightly dusty air https://www.dynair.hu/termek/dynair-pr-l-backward-curved-blade-centrifugal-fans-for-clean-or-slightly-dusty-air/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8123/ The PR-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can be used in other industrial processes as well, such as baker ovens, spray booths, boilers, silos, cooling systems, etc. PR-L fans can convey clean air, smoke or even slightly dusty air with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  at a low pressure.

Airflow: up to 105 000 m3/h
Max static pressure buildup: 5 000 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PR-L/AT high temp version
PR-L/INOX stainless steel version
PR-L ATX ATEX version

CATALOGUE

The post Dynair PR-L Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
  • Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
  • Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-L Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Dynair PQ-L Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pq-l-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8120/ The PQ-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PQ-L fans can convey somke, or slightly dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 120 000m3/h
Max static pressure buildup: 14 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PQ-L/INOX stainless steel version
PQ-L ATX ATEX anti-explosion version

CATALOGUE

The post Dynair PQ-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
  • Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
  • Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PQ-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PV-L Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pv-l-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8121/ The PV-L series of fans are designed  for industrial or commercial applications, such as pneumatic transportation, suction and filtering processes in foundries, cement factories, mines, marble-, ceramics-, or glass factories, furnaces, etc.  PV-L fans can convey clean or slightly dusty air and smoke, with temperatures between -20°C and +80°C  in standard configurations, and up to 150°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 6 500 m3/h
Max static pressure buildup: 6 800 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PV-L/AT high temp version
PV-L/INOX stainless steel version
PV-L ATX ATEX version

CATALOGUE

The post Dynair PV-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
  • Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
  • Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motors, with IP55 Class F protection, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PV-L Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pq-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8141/ These fans are the stainless steel versions of the PQ-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PQ-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PQ-L fans can convey somke, or slightly dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 120 000m3/h
Max static pressure buildup: 14 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PQ-L ATX ATEX anti-explosion version

CATALOGUE

The post Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-pv-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8143/ These fans are the stainless steel versions of the PV-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PV-L series of fans are designed  for industrial or commercial applications, such as pneumatic transportation, suction and filtering processes in foundries, cement factories, mines, marble-, ceramics-, or glass factories, furnaces, etc.  PV-L fans can convey clean or slightly dusty air and smoke, with temperatures between -20°C and +80°C  in standard configurations, and up to 150°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 6 500 m3/h
Max static pressure buildup: 6 800 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PV-L/AT high temp version
PV-L ATX ATEX version

CATALOGUE

The post Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-ps-l-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8144/ These fans are the stainless steel versions of the PS-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PS-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can also be used in many different manufacturing processes(lumber industry, chemical industry, mills, mines, foundries, etc.). PS-L fans can convey somke, or very dusty air without abrasive particles, with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and medium  pressure.

Airflow: up to 42 000 m3/h
Max static pressure buildup: 5 500 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PS-L/AT high temp version
PS-L ATX ATEX version

CATALOGUE

The post Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air https://www.dynair.hu/termek/dynair-pr-l-inox-backward-curved-blade-centrifugal-fans-for-clean-or-slightly-dusty-air/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8145/ These fans are the stainless steel versions of the PR-L series of centrifugal fans, with the whole casing and impeller made from AISI304 stainless steel.

The PR-L series of fans are designed  for industrial or commercial applications, for heating, ventilation, air-conditioning, or filtering in large estabilishments. They can be used in other industrial processes as well, such as baker ovens, spray booths, boilers, silos, cooling systems, etc. PR-L fans can convey clean air, smoke or even slightly dusty air with temperatures between -20°C and +80°C  in standard configurations, and up to 300°C in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  at a low pressure.

Airflow: up to 105 000 m3/h
Max static pressure buildup: 5 000 Pa
Max operating temperature: 80°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PR-L/AT high temp version
PR-L ATX ATEX version

CATALOGUE

The post Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of AISI304 stainless steel sheet.
  • Aerodynamically shaped inlet cone, made from AISI304 stainless steel sheet.
  • Single inlet, high efficiency  backward-curved steel impeller, also made from AISI304 stainless steel. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

]]> Dynair PS-L/AT-INOX Backward curved blade centrifugal fans for dusty air https://www.dynair.hu/termek/dynair-ps-l-at-inox-backward-curved-blade-centrifugal-fans-for-dusty-air/ Tue, 19 Jun 2018 09:12:09 +0000 http://www.dynair.hu/?post_type=product&p=9189 These fans are the high heat tolerance versions of the PS-L series of centrifugal fans. Optionally available with a stainless steel construction, the device can tolerate heat up to 150°C in execution 4, and up to 300°C in executions 1 or 12.

The PS-L series of fans are designed  for industrial or commercial applications, such as pneumatic transportation, suction and filtering processes in foundries, cement factories, mines, marble-, ceramics-, or glass factories, furnaces, etc.  PS-L fans can convey clean or slightly dusty air and smoke, with temperatures between -20°C and +80°C  in standard configurations, and up to 300 in special versions. This series features both belt-driven(execution 4) and direct drive(execution 1,9,12) versions, suitable for applications with high airflow  and moderately high pressure.

Airflow: up to 4 200 m3/h
Max static pressure buildup: 5 500 Pa
Max operating temperature: 300°C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

PS-L/INOX stainless steel version
PS-L ATX ATEX version

CATALOGUE

The post Dynair PS-L/AT-INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]> Construction:

  • Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint. The AT-INOX version features a stainless steel AISI304 casing.
  • Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint. The AT-INOX version features a stainless steel AISI304 inlet cone.
  • Single inlet, high efficiency  backward-curved steel impeller. The AT-INOX version features a stainless steel AISI304 impeller. Class 3 versions are suited for operation at high speed.
  • For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
  • Asynchronous three-phase motors, with IP55 Class F protection, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).

Accessoreies:

  • Condensation drain hole (TS)
  • Inspection door (PI)
  • Inlet counter flange(CFA)
  • Outlet counter flange(CFP)
  • Inlet protection guard(RA)
  • Outlet protection guard(RP)
  • Inlet flexible connector(GA)
  • Outlet flexible connector(GP)
  • Inlet vane control
  • Outlet setting shutter
  • Anti-vibration mounts

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair PS-L/AT-INOX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

]]>