In the version with humidistat, the unit achieves A+ energy class.

The unit has a diameter of 160 mm and can be installed on external walls up to 800 mm thick, with minimal masonry work.

They are the ideal solution in case of renovation, energy requalification, or localized intervention to permanently solve humidity and condensation problems.

Rec Duo operates on the so-called “push-pull” principle, i.e., with alternating flow. It is equipped with a ceramic regenerative heat exchanger that stores the heat of the extracted air during the extraction cycle (pull) and then releases it to the supply air during the supply cycle (push).

Available in 4 models:

REC Duo EVO with RLS Duo Evo power supply and control unit – pipe length: 500 mm
REC Duo EVO with RLS Duo Evo power supply and control unit – pipe length: 800 mm
REC Duo EVO with RLS Duo Evo RC remote control – pipe length: 500 mm
REC Duo EVO with RLS Duo Evo RC remote control – pipe length: 800 mm

The post Dynair REC DUO EVO appeared first on Dynair.hu.

Elkülönül a REC Duo 150 sorozattól a kiemelkedő hangszigetelésének (D n,e,w : 45 dB) köszönhetően, amelyet a külső zajszigetelt, szélvédő burkolat biztosít. A burkolatot kifejezetten a külső zaj csökkentésére tervezték, tűzálló hangszigetelő anyaggal van ellátva, és 304-es rozsdamentes acéllemezből készült, elülső ellenőrző panellel és rovarhálóval.

Rendkívül egyszerű és gyors telepítés:
– minimális falazási munkák: elegendő egy 150 mm-es furat a külső falon.
– mágneses csatlakoztatás/leválasztás a ventilátoregységről
– teleszkópos cső

A REC Duo 150 Silent az úgynevezett „push-pull” működési elven alapul, azaz váltakozó áramlással, 60 másodperces áramlásirány-váltási ciklussal. Kerámia akkumulátoros hőcserélővel rendelkezik, amely az elszívási ciklusban (pull) tárolja az elszívott levegő hőjét, majd a befúvási ciklusban (push) átadja azt a befújt levegőnek.

Folyamatos (24 órás) üzemelésre tervezték minimális sebességen. A maximális sebességre váltás manuális felhasználói beavatkozással (távirányító gomb/kapcsoló – nem tartozék, vagy opcionálisan elérhető RLS vezérlés) vagy automatikusan, páratartalom-érzékelőn keresztül történik a REC Duo Silent MHY és REC Duo Silent RC változatok esetében.

The post Dynair REC DUO 150 SILENT appeared first on Dynair.hu.

Extremely simple and fast installation:
– minimal masonry work: only a 150 mm hole in the perimeter wall is required.
– magnetic attachment/detachment of the fan unit
– “inside-out” type external grille, installable from the inside
– telescopic pipe

The REC Duo 150 operates on the so-called “push-pull” principle, i.e., with alternating flow and a 60-second flow reversal cycle. It is equipped with a ceramic regenerative heat exchanger that stores the heat of the extracted air during the extraction cycle (pull) and then releases it to the supply air during the supply cycle (push).

It is designed for continuous operation (24h) at minimum speed. Switching to maximum speed is done either by manual user intervention (remote button/switch – not supplied, or RLS control available as an accessory) or automatically via a humidistat for the REC Duo MHY and REC Duo RC versions.

The post Dynair REC DUO 150 appeared first on Dynair.hu.

It differs from the REC Duo 100 series due to its outstanding sound insulation (D n,e,w: 45 dB), achieved through the externally sound-insulated, windproof casing. The casing is specifically designed to reduce noise coming from outside, is equipped with fireproof sound-absorbing material, and is made of 304 stainless steel sheet with a front inspection panel and insect screen.

Extremely simple and fast installation:
– minimal masonry work: only a 100 mm hole in the perimeter wall is required.
– magnetic attachment/detachment of the fan unit
– telescopic pipe

The REC Duo 100 Silent operates on the so-called “push-pull” principle, i.e., with alternating flow and a 60-second flow reversal cycle. It is equipped with a ceramic regenerative heat exchanger that stores the heat of the extracted air during the extraction cycle (pull) and then releases it to the supply air during the supply cycle (push).

It is designed for continuous operation (24h) at minimum speed. Switching to maximum speed is done either by manual user intervention (remote button/switch – not supplied, or RLS control available as an accessory) or automatically via a humidistat for the REC Duo Silent MHY and REC Duo Silent RC versions.

The post Dynair REC DUO 100 SILENT appeared first on Dynair.hu.

• Casing made from galvanized steel sheet, inside lined with acoustic insulation.
• IPX4 grade protection.
• Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
• Easily accessible motor and impeller for maintenance purposes.
• Backward curved blade impeller, for low noise and high efficiency operation.
• Easy installation onto any wall or ceiling, with the provided mounting brackets.
• Plastic fittings.
• 4 intake points.

Accessories:

• RLS 1 WR remote for adjusting ventilation speed (compatible with Multibox EC)
• RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Multibox 3V)

Available models:

• Multibox 3V
  • AC motor.
  • 3 speed version with continuous operation at idle speed.
  • Device speed is controllable via the RLS 3V remote (sold separately).
• Multibox Control
  • AC motor.
  • Device speed is continuously variable between 100 and 246 m³/h, via the new VSD controller.
  • The VSD is included with the device as standard.
• Multibox EC
  • EC motor.
  • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m³/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MULTIBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

• Casing made from galvanized steel sheet, inside lined with acoustic insulation.
• IPX4 grade protection.
• Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
• Easily accessible motor and impeller for maintenance purposes.
• Backward curved blade impeller, for low noise and high efficiency operation.
• Easy installation onto any wall or ceiling, with the provided mounting brackets.
• Plastic fittings.
• 2 intake points.

Accessories:

• RLS 1 WR remote for adjusting ventilation speed (compatible with Microbox EC)
• RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Microbox 3V)

Available models:

• Microbox 3V
  • AC motor.
  • 3 speed version with continuous operation at idle speed.
  • Device speed is controllable via the RLS 3V remote (sold separately).
• Microbox Control
  • AC motor.
  • Device speed is continuously variable between 100 and 246 m³/h, via the new VSD controller.
  • The VSD is included with the device as standard.
• Microbox EC
  • EC motor.
  • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m³/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MICROBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

• REC SanAir WALL
  • Can be installed on any perimeter wall.
  • This unique model is suitable for both vertical or horizontal installation.
  • Easy installation: only 2 holes with 100 mm diameter are necessary.
• REC SanAir IN WALL
  • Can be installed on any perimeter wall.
  • Built-in design, the device is flush with the wall, suitable for both vertical or horizontal installation.
• REC SanAir WINDOW
  • Can be mounted on any window frame, up to 180 mm of width and 3000 mm of length.

The exact dimensions can be seen in the catalogue.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SanAir Decentralized HRU appeared first on Dynair.hu.

• Remarkably high thermal efficiency ceramic heat exchanger, with up to 90% heat recovery.
• Ideal for residential applications, where a constant temperature is required in all seasons.
• Recommended to be installed in pairs, maximizing the system efficiency in single-room or multi-room use cases.
• Featuring direct discharge, installable into 300 to 500 mm thick walls. (Optionally available for 220-1000 mm walls as well.
• Suitable for conveying clean air up to 50°C.
• Very slim and compact front cover, with an aesthetic design.
• Equipped with G3 class washable and replaceable filters, on both intake and exhaust sides.
• “Free-cooling” mode without heat recovery, and anti-freeze mode.
• Complaint with EN 60335-2-80, LVD 2014/35/UE és EMC 2014/30/UE international standards.
• IPX4 grade protection.
• CE marked.

Available models:

• REC DUO 100
  • Continuous operation at idel speed (selectable between 2 at installation).
  • Can be turned into extraction-only mode via the RLS remote (remote sold separately).
  • Maximum fan speed can be set with a timer between 0 and 30 minutes, after which the device automatically returns to idle speed.
• REC DUO 100 MHY
  • A REC DUO 100 equipped with a built-in moisture sensor, which automatically sets the ventilation level accordingly; when the predetermined level is reached it turns up the fan speed.
• REC DUO 100 PLUS RC
  • This version comes with a remote, giving the customer access to the following 7 options:
    • 0 – On/Off
    • 1 – Continuous ventilation at idle speed.
    • 2 – Middle fan speed.
    • 3 –  High fan speed.
    • 4 – Timer for extra high fan speed.
    • 5 – Sleep mode (8 hours of very low noise operation)
    • 6 – Ventilation mode (extraction only / induction only)
    • 7 – “free-cooling mode” (ventilation without heat recovery)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC DUO 100 – Decentralized Heat Recovery Unit appeared first on Dynair.hu.

• Great energy savings thanks to the EC motors.
• Built-in “by-pass” and antifreeze modes.
• Equipped with 3 filters, air from both directions is cleaned before coming in contact with the heat exchanger.
• Easy maintenance and cleaning: both the filters and the heat exchanger are removable for cleaning purposes.
• Compliant with the following international standards: EN 60335-2-80,  B.T. 2014/35/UE, és EMC 2014/30/UE.
• Tubular heat exchanger, with separate channels for optimal hygiene.
• 3 feedback LEDs, for indication of ventilation mode or any malfunctions.

Available versions:

• REC Smart+ RC
  • Comes with a regular button remote for the adjustment of the following ventilation settings:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
• REC Smart+ TC
  • Comes with a “Touch Panel” remote, with a color screen, which allows manual or automatic management of the following settings during weekly programming:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
    • Humidity value, above which the device automatically switches to a higher fan speed.
    • Ventilation modes (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SMART+ Decentralized HRU with Touch Panel or remote controller appeared first on Dynair.hu.

• Great energy savings thanks to the EC motors.
• Built-in “by-pass” and antifreeze modes.
• Equipped with 3 filters, air from both directions is cleaned before coming in contact with the heat exchanger.
• Easy maintenance and cleaning: both the filters and the heat exchanger are removable for cleaning purposes.
• Compliant with the following international standards: EN 60335-2-80,  B.T. 2014/35/UE, és EMC 2014/30/UE.
• Tubular heat exchanger, with separate channels for optimal hygiene.

The REC Smart is available in 3 different lengths, with 100 mm inner diameters. You can also choose between the standard and the MHY version equipped with a built-in humidity sensor. Both models are equipped with a timer for max operating speeds. The HMY version works with a unique method to adjust ventilation speeds according to the current humidity. The REC Smart is also available with a touchscreen remote for weekly programming of ventilation settings, known as REC Smart+.

Accessories:

• Remote with on/off switch and settings for fan speed.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SMART Decentralized HRU appeared first on Dynair.hu.