• Casing made from galvanized steel sheet, inside lined with acoustic insulation.
• IPX4 grade protection.
• Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
• Easily accessible motor and impeller for maintenance purposes.
• Backward curved blade impeller, for low noise and high efficiency operation.
• Easy installation onto any wall or ceiling, with the provided mounting brackets.
• Plastic fittings.
• 4 intake points.

Accessories:

• RLS 1 WR remote for adjusting ventilation speed (compatible with Multibox EC)
• RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Multibox 3V)

Available models:

• Multibox 3V
  • AC motor.
  • 3 speed version with continuous operation at idle speed.
  • Device speed is controllable via the RLS 3V remote (sold separately).
• Multibox Control
  • AC motor.
  • Device speed is continuously variable between 100 and 246 m³/h, via the new VSD controller.
  • The VSD is included with the device as standard.
• Multibox EC
  • EC motor.
  • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m³/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MULTIBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

• Casing made from galvanized steel sheet, inside lined with acoustic insulation.
• IPX4 grade protection.
• Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
• Easily accessible motor and impeller for maintenance purposes.
• Backward curved blade impeller, for low noise and high efficiency operation.
• Easy installation onto any wall or ceiling, with the provided mounting brackets.
• Plastic fittings.
• 2 intake points.

Accessories:

• RLS 1 WR remote for adjusting ventilation speed (compatible with Microbox EC)
• RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Microbox 3V)

Available models:

• Microbox 3V
  • AC motor.
  • 3 speed version with continuous operation at idle speed.
  • Device speed is controllable via the RLS 3V remote (sold separately).
• Microbox Control
  • AC motor.
  • Device speed is continuously variable between 100 and 246 m³/h, via the new VSD controller.
  • The VSD is included with the device as standard.
• Microbox EC
  • EC motor.
  • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m³/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MICROBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

• REC SanAir WALL
  • Can be installed on any perimeter wall.
  • This unique model is suitable for both vertical or horizontal installation.
  • Easy installation: only 2 holes with 100 mm diameter are necessary.
• REC SanAir IN WALL
  • Can be installed on any perimeter wall.
  • Built-in design, the device is flush with the wall, suitable for both vertical or horizontal installation.
• REC SanAir WINDOW
  • Can be mounted on any window frame, up to 180 mm of width and 3000 mm of length.

The exact dimensions can be seen in the catalogue.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SanAir Decentralized HRU appeared first on Dynair.hu.

• Remarkably high thermal efficiency ceramic heat exchanger, with up to 90% heat recovery.
• Ideal for residential applications, where a constant temperature is required in all seasons.
• Recommended to be installed in pairs, maximizing the system efficiency in single-room or multi-room use cases.
• Featuring direct discharge, installable into 300 to 500 mm thick walls. (Optionally available for 220-1000 mm walls as well.
• Suitable for conveying clean air up to 50°C.
• Very slim and compact front cover, with an aesthetic design.
• Equipped with G3 class washable and replaceable filters, on both intake and exhaust sides.
• “Free-cooling” mode without heat recovery, and anti-freeze mode.
• Complaint with EN 60335-2-80, LVD 2014/35/UE és EMC 2014/30/UE international standards.
• IPX4 grade protection.
• CE marked.

Available models:

• REC DUO 100
  • Continuous operation at idel speed (selectable between 2 at installation).
  • Can be turned into extraction-only mode via the RLS remote (remote sold separately).
  • Maximum fan speed can be set with a timer between 0 and 30 minutes, after which the device automatically returns to idle speed.
• REC DUO 100 MHY
  • A REC DUO 100 equipped with a built-in moisture sensor, which automatically sets the ventilation level accordingly; when the predetermined level is reached it turns up the fan speed.
• REC DUO 100 PLUS RC
  • This version comes with a remote, giving the customer access to the following 7 options:
    • 0 – On/Off
    • 1 – Continuous ventilation at idle speed.
    • 2 – Middle fan speed.
    • 3 –  High fan speed.
    • 4 – Timer for extra high fan speed.
    • 5 – Sleep mode (8 hours of very low noise operation)
    • 6 – Ventilation mode (extraction only / induction only)
    • 7 – “free-cooling mode” (ventilation without heat recovery)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC DUO 100 – Decentralized Heat Recovery Unit appeared first on Dynair.hu.

• Great energy savings thanks to the EC motors.
• Built-in “by-pass” and antifreeze modes.
• Equipped with 3 filters, air from both directions is cleaned before coming in contact with the heat exchanger.
• Easy maintenance and cleaning: both the filters and the heat exchanger are removable for cleaning purposes.
• Compliant with the following international standards: EN 60335-2-80,  B.T. 2014/35/UE, és EMC 2014/30/UE.
• Tubular heat exchanger, with separate channels for optimal hygiene.
• 3 feedback LEDs, for indication of ventilation mode or any malfunctions.

Available versions:

• REC Smart+ RC
  • Comes with a regular button remote for the adjustment of the following ventilation settings:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
• REC Smart+ TC
  • Comes with a “Touch Panel” remote, with a color screen, which allows manual or automatic management of the following settings during weekly programming:
    • On/off switch.
    • Ventilation level (fan speed).
    • Sleep mode, which allows the device to run with extra low noise during nighttime.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the device from switching to idle speed.
    • Humidity value, above which the device automatically switches to a higher fan speed.
    • Ventilation modes (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SMART+ Decentralized HRU with Touch Panel or remote controller appeared first on Dynair.hu.

• Great energy savings thanks to the EC motors.
• Built-in “by-pass” and antifreeze modes.
• Equipped with 3 filters, air from both directions is cleaned before coming in contact with the heat exchanger.
• Easy maintenance and cleaning: both the filters and the heat exchanger are removable for cleaning purposes.
• Compliant with the following international standards: EN 60335-2-80,  B.T. 2014/35/UE, és EMC 2014/30/UE.
• Tubular heat exchanger, with separate channels for optimal hygiene.

The REC Smart is available in 3 different lengths, with 100 mm inner diameters. You can also choose between the standard and the MHY version equipped with a built-in humidity sensor. Both models are equipped with a timer for max operating speeds. The HMY version works with a unique method to adjust ventilation speeds according to the current humidity. The REC Smart is also available with a touchscreen remote for weekly programming of ventilation settings, known as REC Smart+.

Accessories:

• Remote with on/off switch and settings for fan speed.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SMART Decentralized HRU appeared first on Dynair.hu.

• The PPE plastic casing provides great sound- and thermal insulation.0
• Built-in “by-pass” function.
• Variable speed, high efficiency, brushless EK motors.
• Low noise operation.
• M6 class filtering system.
• Comes standard with mounting brackets and RLS 1WR control panel (EC motor versions).
• IPX2 grade protection.
• Compliant with the following international standards: EN 60335-2-80, B.T. 2014/35 / UE, EMC 2014/30 / UE.
• Performance tested by an independent committee, according to the EN 13141-7, az EN 13101-4, az EN 5801 és az EN 308 regulations.
• Remote Touch Panel – allows manual or automatic management of the following settings during weekly programming:
  • Ventilation level.
  • Ventilation mode (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)
  • Adjustable moisture level, at which the fan speed increases.
  • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the switch to idle speed.
  • Sleep mode, which allows the device to run with extra low noise during nighttime.

Available models:

• REC IN LINEA 140:
  • Ideal solution for houses with a maximum of 4 rooms and 80 m² area.
  • Setup: 2 extraction and 2 induction ports.
  • Airflow: up to 140 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC motors.
• REC IN LINEA 180:
  • Ideal for houses with a maximum of 6 rooms and 100 m² area.
  • Setup: 3 extraction and 3 induction ports.
  • Airflow: up to 180 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC or AC motors.
• REC IN LINEA 220:
  • Ideal for houses with a maximum of 8 rooms and 120 m² area.
  • Setup: 4 extraction and 4induction ports.
  • Airflow: up to 220 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC or AC motors.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC IN LINEA TC Centralized HRU with Touch panel control – Horizontal installation appeared first on Dynair.hu.

• The PPE plastic casing provides great sound- and thermal insulation.0
• Built-in “by-pass” function.
• Variable speed, high efficiency, brushless EK motors.
• Low noise operation.
• M6 class filtering system.
• Comes standard with mounting brackets and RLS 1WR control panel (EC motor versions).
• IPX2 grade protection.
• Compliant with the following international standards: EN 60335-2-80, B.T. 2014/35 / UE, EMC 2014/30 / UE.
• Performance tested by an independent committee, according to the EN 13141-7, az EN 13101-4, az EN 5801 és az EN 308 regulations.

Device versions:

• REC IN LINEA AC
  • Equipped with an external rotor motor with 2 operating speeds and a backward curved blade impeller, this device can operate continuously at idle speed, with the maximal fan speed being activated via the RLS 3V remote.
• REC IN LINEA EC
  • Low noise, highly efficient brushless motor with great aeraulic performance.
  • Class “A” energy efficiency.
  • The EC models come with an RLS 1WR remote, in order to set the ventilation level.
• REC IN LINEA EC TC
  • Comes with a “Touch Panel” remote, with a color screen.
  • The panel allows manual or automatic management of the ventilation settings during weekly programming

Available models:

• REC IN LINEA 140:
  • Ideal solution for houses with a maximum of 4 rooms and 80 m² area.
  • Setup: 2 extraction and 2 induction ports.
  • Airflow: up to 140 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC motors.
• REC IN LINEA 180:
  • Ideal for houses with a maximum of 6 rooms and 100 m² area.
  • Setup: 3 extraction and 3 induction ports.
  • Airflow: up to 180 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC or AC motors.
• REC IN LINEA 220:
  • Ideal for houses with a maximum of 8 rooms and 120 m² area.
  • Setup: 4 extraction and 4induction ports.
  • Airflow: up to 220 m³/h.
  • Built-in “by-pass” mode.
  • Equipped with EC or AC motors.

Accessories:

• RLS 3V – remote with on/off switch and ventilation level control (comes as standard with the 180 and 220 models)
• RLS 1WR – remote for ventilation level control, with LED feedback lights (comes as standard with the 140 model)
• Remote Touch Panel – allows manual or automatic management of the following settings during weekly programming:
  • Ventilation level.
  • Ventilation mode (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)
  • Adjustable moisture level, at which the fan speed increases.
  • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the switch to idle speed.
  • Sleep mode, which allows the device to run with extra low noise during nighttime.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC IN LINEA Centralized HRU – Horizontal installation appeared first on Dynair.hu.

• Casing made from galvanized steel sheet, with an epoxy coating.
• PPE inner panels, for outstanding heat- and sound insulation.
• G4 class integrated filtering system.

Comes with a “Touch Panel” remote, with a color screen.
The panel allows manual or automatic management of the following settings during weekly programming:

• • Ventilation level.
  • Ventilation mode (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)
  • Adjustable moisture level, at which the fan speed increases.
  • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the switch to idle speed.
  • Sleep mode, which allows the device to run with extra low noise during nighttime.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC 320 TC Centralized HRU with control Touch Panel – Vertical Installation appeared first on Dynair.hu.

• Casing made from galvanized steel sheet, with an epoxy coating.
• PPE inner panels, for outstanding heat- and sound insulation.
• G4 class integrated filtering system.

Accessories:

• RLS 3V – remote for turning the device on/off and selecting ventilation level (available for the REC 280)
• Remote Touch Panel –  remote with a color screen, available as an optional extra for the REC 320 (included as standard with the REC 320 TC)

Available models:

• REC 280
  • Equipped with an external rotor motor with 2 operating speeds and a backward curved blade impeller, this device can operate continuously at idle speed, with the maximal fan speed being activated via the remote.
  • AC motor
  • Airflow: up to 280 m³/ h
• REC 320
  • Brushless motor, for low noise operation and high efficiency.
  • Class “A” energy efficiency.
  • Ventilation level can be adjusted via the RLS 1WR remote (included with the device as standard).
• REC 320 TC
  • Comes with a “Touch Panel” remote, with a color screen.
  • The panel allows manual or automatic management of the following settings during weekly programming:
    • Ventilation level.
    • Ventilation mode (“by-pass”, “free-cooling” ventilation without heat recovery, extraction only, or induction only)
    • Adjustable moisture level, at which the fan speed increases.
    • Post-ventilation settings, where a timer between 0 and 30 minutes is adjustable, to delay the switch to idle speed.
    • Sleep mode, which allows the device to run with extra low noise during nighttime.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC 280-320 Centralized HRU vertical installation appeared first on Dynair.hu.