Ducted axial fans – Dynair.hu https://www.dynair.hu Dynair ventilation Mon, 01 Aug 2022 13:52:19 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.dynair.hu/wp-content/uploads/2022/01/favicon.jpg Ducted axial fans – Dynair.hu https://www.dynair.hu 32 32 Dynair ZOO belt-driven axial fans https://www.dynair.hu/termek/dynair-zoo-belt-driven-axial-fans/ Fri, 27 Jul 2018 11:21:28 +0000 http://www.dynair.hu/?post_type=product&p=8737 These fans were specifically designed to be used in highly corrosive and/or very humid environemnts. Common applications include greenhouses, farms, agricultural estabilishmentes, car washes, creameries,  or compressor enclosures. These devices can be easily mounted onto a wall, and can operate in temperatures between -20°C and +60°C. The ZOO range consists of  two different models; the ZOO R and the ZOO S. While the ZOO R features a protective wire grill on both sides, the ZOO S only has one on the inlet side, and is instead equipped with a gravity shutter on the outlet side. Both versions are available in 5 different sizes, with impeller sizes between 660 and 1270 mm in diameter.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

The post Dynair ZOO belt-driven axial fans appeared first on Dynair.hu.

]]> Construction:

  • Belt-driven fans.
  • Motor outside the path of airflow.
  • Housing made from galvanized steel sheet.
  • Impeller blades made out of AISI 304 stainless steel, with an aluminium hub.
  • Asynchronous three phase, ball bearing motor, suitable for continuous operation at 230/400V~50Hz.
  • Protection grade: IP54.
  • Insulation: Class F.

Single phase motor version available upon request.

For further details, feel free to contact KOMPEL Kft.

The post Dynair ZOO belt-driven axial fans appeared first on Dynair.hu.

]]> Dynair CCZ Compact and high efficiency ducted axial fans https://www.dynair.hu/termek/dynair-ccz-compact-and-high-efficiency-ducted-axial-fans/ Fri, 27 Jul 2018 10:14:24 +0000 http://www.dynair.hu/?post_type=product&p=8733 The duct axial fans of the CCZ series are used for ducted installations requiring large airflow with relatively low pressure drop, like ventilation and cooling systems in industrial, naval, commercial, civil and energetic fields. These fans are particularly easy to install and maintain thanks to their compact size, and lack of protruding parts. The motors are continuously speed controllable and ensure low noise operation. The CCZ series consists of 6 different sized models, with impeller diamters ranging from 310 to 560 mm. These fans are suitable for conveying clean air in temperatures between -25°C and +60°C.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair CCZ Compact and high efficiency ducted axial fans appeared first on Dynair.hu.

]]> Construction:

  • Short casing made out of steel sheet, with fixing flanges manufactured according to the UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint.
  • High quality aerofoil profile impellers made from technopolymer reinforced with mineral fibers (models 310 to 400) or die cast aluminum alloy (models 450 to 560). Blades are attached directly to the external rotor of the motor, with airflow from motor to impeller.
  • External rotor motors with built-in thermal protection, available in a single-phase variable speed, or three-phase double-speed version. Connection box on the casing (up to model 400) or on the motor (models 450 to 560).

Accessories:

  • Flat protection guard (CCr)
  • Flexible connectors (CCga)
  • Inlet/outlet bell mouth (CCbo)
  • Silencers, with or without pod, available in three lengths (CCsa and CCsb)
  • Flat counter flange (Ccf)
  • Counter flange with collar (CCfc)
  • Anti-vibration mounts

Available upon request:

  • Casing protected against atmospheric agents by hot-dip galvanizing
  • Portable version, with a stand (CCP)

For further details, feel free to contact KOMPEL Kft.

The post Dynair CCZ Compact and high efficiency ducted axial fans appeared first on Dynair.hu.

]]> Dynair TA-HP high performance ducted axial fan https://www.dynair.hu/termek/dynair-ta-hp-high-performance-ducted-axial-fan/ Fri, 27 Jul 2018 09:31:35 +0000 http://www.dynair.hu/?post_type=product&p=8728 TA-HP fans are particularly long-lasting, robust, and provide outstanding performance, thanks to the aerofoil profile blades, along with the aerodynamically optimized design. The long casing construction allows for easy installation. They are available in a wide variety of configurations; offering fans with 6, 9, or 12 blades, measuring between 400 and 1600mm in diameter, available with 2,4,6 or even 8 pole motors. This series of fans are suitable for running in temperatures between -20°C and +70°C. The ErP conformity is defined in phase of selection via Blowdyn 2.0 software or by contacting Kompel Kft directly.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair TA-HP high performance ducted axial fan appeared first on Dynair.hu.

]]> Construction:

  • Long casing made from steel sheet, painted in epoxy, equipped with fixing flanges, manufactured in compliance with the UNI ISO 6580-EUROVENT standard.
  • High performance axial impeller with aerofoil blades, made completely out of die-cast aluminium. Balanced according to ISO 1940 standard. The pitch angle of the blades can be adjusted when stationary.
  • Inspection door.
  • Asynchronous three-phase IE2 motors,CE marked, with IP55 protection and Class F insulation, compliant with the following international standards: IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Impeller coupled directly to the motor.
  • Suitable for S1 service(continuous operation at constant load).

Accessories:

  • Inlet/outlet cone (CCbo)
  • Flexible joint (CCga)
  • Flat protection grid (CCr)
  • Support feet (CCst)
  • Counter flange (CCf)
  • Counter flange with collar (CCfc)
  • Cylindrical silencers with or without pod (CCsa/CCsb)
  • Roof exit kit (TAV adapter)

The post Dynair TA-HP high performance ducted axial fan appeared first on Dynair.hu.

]]> Dynair CCP portable duct axial fans https://www.dynair.hu/termek/dynair-ccp-portable-duct-axial-fans/ Tue, 26 Jun 2018 13:25:51 +0000 http://www.dynair.hu/?post_type=product&p=8621 The CCP series of fans are designed for situations where powerful airflow is necessary; for instance: creating visual effects in theratres or movie sets,  or to provide adequate cooling for people working close to high temperature heat sources (mancooler).  Thanks to its stable feet and adjustable mount, the device can be easily moved and set in the most suitable position and orientation. Suitable for clean air in temperatures ranging from -15°C to +50°C in continuous service. The  CCP fan is equipped with an electrical plug mounted on the casing in order to provide easy electrical connection.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

The post Dynair CCP portable duct axial fans appeared first on Dynair.hu.

]]> Construction:

  • Casing made out of steel sheet and stand made from tubular metal, protected against atmospheric agents with epoxy coating. Knobs on the side of the casing allow for precise adjustments.
  • Protection guard on both inlet and outlet sides, made in compliance with UNI 12499 regulations.
  • Aerofoil profile impeller blades made out of reinforced plastic (mineral fiber reinforced technopolymer) for models 310 to 400, while the 450 and 560 models feature a die cast aluminium impeller.
  • Impeller coupled directly to motor, with airflow going from motor to impeller.
  • External rotor, single-phase variable speed, or three-phase dual speed motors, with built-in thermal protection. All motors come with external connection box.

630 and 710 models are available upon request.

For further details, feel free to contact KOMPEL Kft.

The post Dynair CCP portable duct axial fans appeared first on Dynair.hu.

]]> Dynair CC ducted axial fan https://www.dynair.hu/termek/dynair-cc-ducted-axial-fan/ Tue, 19 Jun 2018 09:12:14 +0000 http://www.dynair.hu/termek/import-placeholder-for-8166/ The axial duct fans of the CC series are made for ducted installations requiring large airflow with relatively low pressure drop, like ventilation and cooling systems in industrial, naval, commercial, civil, and  energetic fields. Compared to their cenrtifugal counterparts, this series of fans has  the advantage of being smaller in dimensions and easier to be installed. The series consists of 15 different sized models with impeller diameters ranging from 310 to 1600 mm. CC fans can be fitted with motors of different polarity, depending on size and required performance. Suitable for conveying clean air with temperatures between  -15°C and +50°C in continuous service.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair CC ducted axial fan appeared first on Dynair.hu.

]]> Construction:

  • Short casing made out of steel sheet, with fixing flanges manufactured according to the ISO 13351 standard. Protected against atmospheric agents by epoxy paint.
  • Axial impeller with aerofoil profile blades made from technopolymer with a die-cast aluminium hub, balanced according to  ISO 1940.  Pitch angle of the blades can be varied, when stationary.
  • Impeller coupled directly to motor with feet,  airflow from motor to impeller.
  • Asynchronous single-, or three-phase motors, CE marked ,with IP55 grade protection and class F insulation, compliant with the following international standards: IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE. Suitable for continuous „S1” service at constant load.
  • Suitable for S1 service (continuous operation at constant load).

Accessories:

  • Extension (for long casing version) with inspection porthole (CCpro)
  • Flat protection guard (CCr)
  • Conic protection guard (CCrc)
  • Flexible connectors (CCga)
  • Support feet (CCst)
  • Inlet/outlet bell mouth (CCbo)
  • Silencers, with or without pod, available in three lengths (CCsa and CCsb)
  • Flat counter flange (Ccf)

Available upon request:

  • CCZ version, with die cast aluminium aerofoil blades.
  • Weatherproof casing.
  • Reverse airflow versions.
  • External connection box.
  • CC-ATX : ATEX certified version, compliant with ATEX directives 94/9/CE and 2014/34/UE.

For further details, feel free to contact KOMPEL Kft.

The post Dynair CC ducted axial fan appeared first on Dynair.hu.

]]> Dynair AXC – LINE METAL Round duct centrifugal in-line fans https://www.dynair.hu/termek/dynair-axc-line-metal-round-duct-centrifugal-in-line-fans/ Tue, 19 Jun 2018 09:12:13 +0000 http://www.dynair.hu/termek/import-placeholder-for-8157/ The AXC LINE-METAL are a series of centrifugal in-line fans, with the advantage of conveying air along the axis of the impeller, typical of axial fans. This feature, the limited dimensions and standardized inlet and outlet sizes grant a particular ease of installation. The low noise level and high air pressure make these fans ideal for idustrial use as well as residential applications. They can be installed in any point along the duct, or at the end of duct in either intake or exhaust direction. These fans can convey clean air with temperatures ranging from -10°C to +60°C.

Airflow: up to 2 100 m3/h
Max pressure rise: 960 Pa
Max operating temperature: 70 °C

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair AXC – LINE METAL Round duct centrifugal in-line fans appeared first on Dynair.hu.

]]> Construction:

  • Casing made from steel sheet, protected against atmospheric agents by epoxy paint.
  • Single-phase electric ball-bearing motor, particularly suitable for speed regulation, with non-self-resetting thermal cut-out.
  • Backward curved centrifugal impeller with high efficiency and low noise level. Statically and dynamically balanced according to the ISO 1940  standard.
  • Downstream guide vanes for improved efficiency.
  • External electric connections enclosed in a box made out of self-extuingishing technopolymer, with IP54 protection.
  • The fan is complaint with the following international standards: EN 60335-2-80, B.T. 2006/95/CE, EMC 2004/108/CE.

Accessories:

  • Speed regulators
  • Backdraught shutters
  • Support brackets
  • Protection guard
  • Collars for connecting the fan to a duct
  • Silencers.

For further details, feel free to contact KOMPEL Kft.

The post Dynair AXC – LINE METAL Round duct centrifugal in-line fans appeared first on Dynair.hu.

]]> Dynair CCB bifurcated ducted axial fans https://www.dynair.hu/termek/dynair-ccb-bifurcated-ducted-axial-fans/ Tue, 19 Jun 2018 09:12:10 +0000 http://www.dynair.hu/termek/import-placeholder-for-8146/ The bifurcated CCB fans are designed to convey hot smoke, fumes and vapours of fluids, or air saturated by grease, oil or particles, where the motor has to be totally separated from the airflow. This is possible thanks to the motor being enclosed in a completely isolated pod, behind the impeller.  For example, they can be used in professional kitchens, painting booths, furnaces, foundries, cooling/evaporative towers, etc. Their design allows for easy installation and maintenance. The casing is double ended with standard flanges, allowing for installation either along the ducting or at both ends. The fans of the CCB series are designed to convey air with a temperatures  up to +200°C in continuous "S1" service at constant load.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair CCB bifurcated ducted axial fans appeared first on Dynair.hu.

]]> Construction:

  • Stainless steel AISI 304 casing, with airtight motor housing, featuring fixing flanges manufactured according to ISO 13351 standards.
  • High performance axial impeller with aerofoil profile blades and hub made from die cast aluminium, balanced according to the ISO 1940 standard. The pitch angle of the blades can be adjusted when stationary.
  • Impeller coupled directly to the motor, with airflow from impeller to motor.
  • Asynchronous single- or three-phase motor, suitable for S1 service (coninuous operation at constant load) with IP55 grade protection, Class F insulation, CE marked, in compliance with the following international standards: IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE.

Accessories:

  • Flat protection guard (CCr)
  • Flexible noise-cancelling connectors (CCga)
  • Support feet (CCst)
  • Inlet/outlet bell mouth (CCbo)
  • Silencers, with or without pod, in three lengths (CCsa or CCsb)
  • Counter flange (CCf)
  • Counter flange with collar (CCfc)
  • Anti-vibration mounts

Epoxy painted case available upon request.

For further details, feel free to contact KOMPEL Kft.

The post Dynair CCB bifurcated ducted axial fans appeared first on Dynair.hu.

]]>