ErP Directive compliant fans – Dynair.hu https://www.dynair.hu Dynair ventilation Thu, 25 Aug 2022 07:55:12 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.dynair.hu/wp-content/uploads/2022/01/favicon.jpg ErP Directive compliant fans – Dynair.hu https://www.dynair.hu 32 32 Dynair FCP-V single-speed centrifugal roof fans with vertical discharge https://www.dynair.hu/termek/dynair-fcp-v-single-speed-centrifugal-roof-fans-vertical-discharge/ Fri, 17 Jun 2022 10:27:12 +0000 https://www.dynair.hu/?post_type=product&p=12593

The FCP-V line is our latest series of high performance centrifugal roof fans, with vertical discharge, suitable for direct or ducted extraction in residential, commercial, or even industrial applications. The backward curved blades provide great airflow while maintaining low noise level. The device is suitable for use with clean or slightly dusty air, in temperatures between -20 and +80°C. Available in multiple different sizes, ranging from 800 to 1600 mm in diameter.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

Versions:
FCP with horizontal discharge
FCP-V ATEX for explosive environments

CATALOGUE

ACCESSORIES

The post Dynair FCP-V single-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

]]> Construction:

  • Mounting plate made from galvanized steel.
  • Protection guard made from sqaure micro-pressed steel sheet, protected against the elements (model 350 features a guard made out of drawn steel wire). Manufactured according to the EN ISO 12499 standard.
  • High efficiency, backward curved blade impeller made from galvanized steel sheet, with low noise levels, statically and dynamically balanced statically and dynamically according to ISO 1940 standard.
  • Upper cover made out of ABS plastic, with appropriate cooling slots for the motor.

Motor:        

  • Asynchronous single- or three-phase motor, CE marked, with IP55 grade protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Suitable for S1 Service (continuous operation at constant load).

Accessories:

  • Backdraught gravity shutter (TS)
  • Silencer (GR)
  • Counterbase (CB)
  • Mounting plate for corrugated roofs (BA)
  • Inlet protection guard (RA)
  • Service switch
  • Acoustically insulated support base(PB)
  • Flat protection guard (CCr)

Also available in a 60Hz version, and an ATEX certified version for potentially flammable or explosive environments (See: ATEX Fans).

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCP-V single-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

]]> Dynair FCP single-speed centrifugal roof fans with horizontal discharge https://www.dynair.hu/termek/dynair-fcp-single-speed-centrifugal-roof-fans-with-horizontal-discharge/ Fri, 17 Jun 2022 09:27:34 +0000 https://www.dynair.hu/?post_type=product&p=12585

The FCP line is our latest series of high performance centrifugal roof fans, with horizontal discharge, suitable for direct or ducted extraction in residential, commercial, or even industrial applications. The backward curved blades provide great airflow while maintaining low noise level. The device is suitable for use with clean or slightly dusty air, in temperatures between -20 and +80°C. Available in multiple different sizes, ranging from 755 to 1400 mm in diameter.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

Versions:
FCP-V with vertical discharge
FCP ATEX for explosive environments

CATALOGUE

ACCESSORIES

The post Dynair FCP single-speed centrifugal roof fans with horizontal discharge appeared first on Dynair.hu.

]]> Construction:

  • Mounting plate made from galvanized steel.
  • Protection guard made from sqaure micro-pressed steel sheet, protected against the elements (model 350 features a guard made out of drawn steel wire). Manufactured according to the EN ISO 12499 standard.
  • High efficiency, backward curved blade impeller made from galvanized steel sheet, with low noise levels, statically and dynamically balanced statically and dynamically according to ISO 1940 standard.
  • Upper cover made out of ABS plastic, with appropriate cooling slots for the motor.

Motor:        

  • Asynchronous single- or three-phase motor, CE marked, with IP55 grade protection and Class F insulation,  manufactured according to the following international standards: IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Suitable for S1 Service (continuous operation at constant load).

Accessories:

  • Backdraught gravity shutter (TS)
  • Silencer (GR)
  • Counterbase (CB)
  • Support base corrugated roofs (BA)
  • Inlet protection guard (RA)
  • Service switch
  • Acoustically insulated support base(PB)
  • Flat protection guard (CCr)

Also available in a 60Hz version, and an ATEX certified version for potentially flammable or explosive environments (See: ATEX Fans).

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCP single-speed centrifugal roof fans with horizontal discharge appeared first on Dynair.hu.

]]> Dynair ZOO belt-driven axial fans https://www.dynair.hu/termek/dynair-zoo-belt-driven-axial-fans/ Fri, 27 Jul 2018 11:21:28 +0000 http://www.dynair.hu/?post_type=product&p=8737 These fans were specifically designed to be used in highly corrosive and/or very humid environemnts. Common applications include greenhouses, farms, agricultural estabilishmentes, car washes, creameries,  or compressor enclosures. These devices can be easily mounted onto a wall, and can operate in temperatures between -20°C and +60°C. The ZOO range consists of  two different models; the ZOO R and the ZOO S. While the ZOO R features a protective wire grill on both sides, the ZOO S only has one on the inlet side, and is instead equipped with a gravity shutter on the outlet side. Both versions are available in 5 different sizes, with impeller sizes between 660 and 1270 mm in diameter.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

The post Dynair ZOO belt-driven axial fans appeared first on Dynair.hu.

]]> Construction:

  • Belt-driven fans.
  • Motor outside the path of airflow.
  • Housing made from galvanized steel sheet.
  • Impeller blades made out of AISI 304 stainless steel, with an aluminium hub.
  • Asynchronous three phase, ball bearing motor, suitable for continuous operation at 230/400V~50Hz.
  • Protection grade: IP54.
  • Insulation: Class F.

Single phase motor version available upon request.

For further details, feel free to contact KOMPEL Kft.

The post Dynair ZOO belt-driven axial fans appeared first on Dynair.hu.

]]> Dynair CCZ Compact and high efficiency ducted axial fans https://www.dynair.hu/termek/dynair-ccz-compact-and-high-efficiency-ducted-axial-fans/ Fri, 27 Jul 2018 10:14:24 +0000 http://www.dynair.hu/?post_type=product&p=8733 The duct axial fans of the CCZ series are used for ducted installations requiring large airflow with relatively low pressure drop, like ventilation and cooling systems in industrial, naval, commercial, civil and energetic fields. These fans are particularly easy to install and maintain thanks to their compact size, and lack of protruding parts. The motors are continuously speed controllable and ensure low noise operation. The CCZ series consists of 6 different sized models, with impeller diamters ranging from 310 to 560 mm. These fans are suitable for conveying clean air in temperatures between -25°C and +60°C.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair CCZ Compact and high efficiency ducted axial fans appeared first on Dynair.hu.

]]> Construction:

  • Short casing made out of steel sheet, with fixing flanges manufactured according to the UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint.
  • High quality aerofoil profile impellers made from technopolymer reinforced with mineral fibers (models 310 to 400) or die cast aluminum alloy (models 450 to 560). Blades are attached directly to the external rotor of the motor, with airflow from motor to impeller.
  • External rotor motors with built-in thermal protection, available in a single-phase variable speed, or three-phase double-speed version. Connection box on the casing (up to model 400) or on the motor (models 450 to 560).

Accessories:

  • Flat protection guard (CCr)
  • Flexible connectors (CCga)
  • Inlet/outlet bell mouth (CCbo)
  • Silencers, with or without pod, available in three lengths (CCsa and CCsb)
  • Flat counter flange (Ccf)
  • Counter flange with collar (CCfc)
  • Anti-vibration mounts

Available upon request:

  • Casing protected against atmospheric agents by hot-dip galvanizing
  • Portable version, with a stand (CCP)

For further details, feel free to contact KOMPEL Kft.

The post Dynair CCZ Compact and high efficiency ducted axial fans appeared first on Dynair.hu.

]]> Dynair TA-HP high performance ducted axial fan https://www.dynair.hu/termek/dynair-ta-hp-high-performance-ducted-axial-fan/ Fri, 27 Jul 2018 09:31:35 +0000 http://www.dynair.hu/?post_type=product&p=8728 TA-HP fans are particularly long-lasting, robust, and provide outstanding performance, thanks to the aerofoil profile blades, along with the aerodynamically optimized design. The long casing construction allows for easy installation. They are available in a wide variety of configurations; offering fans with 6, 9, or 12 blades, measuring between 400 and 1600mm in diameter, available with 2,4,6 or even 8 pole motors. This series of fans are suitable for running in temperatures between -20°C and +70°C. The ErP conformity is defined in phase of selection via Blowdyn 2.0 software or by contacting Kompel Kft directly.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair TA-HP high performance ducted axial fan appeared first on Dynair.hu.

]]> Construction:

  • Long casing made from steel sheet, painted in epoxy, equipped with fixing flanges, manufactured in compliance with the UNI ISO 6580-EUROVENT standard.
  • High performance axial impeller with aerofoil blades, made completely out of die-cast aluminium. Balanced according to ISO 1940 standard. The pitch angle of the blades can be adjusted when stationary.
  • Inspection door.
  • Asynchronous three-phase IE2 motors,CE marked, with IP55 protection and Class F insulation, compliant with the following international standards: IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Impeller coupled directly to the motor.
  • Suitable for S1 service(continuous operation at constant load).

Accessories:

  • Inlet/outlet cone (CCbo)
  • Flexible joint (CCga)
  • Flat protection grid (CCr)
  • Support feet (CCst)
  • Counter flange (CCf)
  • Counter flange with collar (CCfc)
  • Cylindrical silencers with or without pod (CCsa/CCsb)
  • Roof exit kit (TAV adapter)

The post Dynair TA-HP high performance ducted axial fan appeared first on Dynair.hu.

]]> Dynair FCV 2V dual-speed centrifugal roof fans with vertical discharge https://www.dynair.hu/termek/dynair-fcv-2v-dual-speed-centrifugal-roof-fans-with-vertical-discharge/ Fri, 27 Jul 2018 06:47:57 +0000 http://www.dynair.hu/?post_type=product&p=8714 This series of fans features a unique, three-phase motor, with the ability to switch between star and delta configurations, in order to provide two different operating speeds. The motor is outside the path of airflow, allowing  efficient extraction of clean or even slightly dusty air, with temperatures up to 100°C. These fans are suitable for direct or ducted extraction, in residential, commercial, or even industrial applications. Their ingenious design allows for easy installation and smooth, efficient, low noise operation. The FC-2V version features horizontal, the FCV-2V vertical discharge. Available in multiple different sizes; from 650 to 1400mm in diameter.

This product complies with the European Union’s ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair FCV 2V dual-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

]]> Construction:

  • Mounting plate made from galvanized steel.
  • Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
  • Backward curved blade impeller made from galvanized steel, designed for high efficiency and low noise operation, balanced statically and dynamically according to the ISO 1940 standard.
  • Asynchronous, double polarity three-phase motor, CE marked,equipped with IP55 grade protection, Class F insulation, compliant with the following standards: IEC 60034, Iec 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Upper cover made from ABS plastic, featuring cooling slots for the motor.

Accessories:

  • Backdraught gravity shutters (TS)
  • Silencer(GR)
  • Mounting plate for corrugated roofs (BA)
  • Inlet protection guard(RA)
  • Service switch
  • Silenced mounting plate (PB)

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCV 2V dual-speed centrifugal roof fans with vertical discharge appeared first on Dynair.hu.

]]> Dynair FC 2V dual-speed centrifugal roof fans with horinzontal discharge https://www.dynair.hu/termek/dynair-fc-2v-dual-speed-centrifugal-roof-fans-with-horinzontal-discharge/ Fri, 27 Jul 2018 06:37:21 +0000 http://www.dynair.hu/?post_type=product&p=8712 This series of fans features a unique, three-phase motor, with the ability to switch between star and delta configurations, in order to provide two different operating speeds. The motor is outside the path of airflow, allowing  efficient extraction of clean or even slightly dusty air, with temperatures up to 100°C. These fans are suitable for direct or ducted extraction, in residential, commercial, or even industrial applications. Their ingenious design allows for easy installation and smooth, efficient, low noise operation. The FC-2V version features horizontal, the FCV-2V vertical discharge. Available in multiple different sizes; from 600 to 1100mm in diameter.

This product complies with the European Union's ecodesign directive.
ErP Directive compliant fans

CATALOGUE

ACCESSORIES

The post Dynair FC 2V dual-speed centrifugal roof fans with horinzontal discharge appeared first on Dynair.hu.

]]> Construction:

  • Mounting plate made from galvanized steel.
  • Protective shroud manufactured from drawn steel rods, compliant with UNI 10615:1997 regulations.
  • Backward curved blade impeller made from galvanized steel, designed for high efficiency and low noise operation, balanced statically and dynamically according to the ISO 1940 standard.
  • Asynchronous, double polarity three-phase motor, CE marked,equipped with IP55 grade protection, Class F insulation, compliant with the following standards: IEC 60034, Iec 60072, EMC 2014/30/UE, LVD 2014/35/UE.
  • Upper cover made from ABS plastic, featuring cooling slots for the motor.

Accessories:

  • Backdraught gravity shutters (TS)
  • Silencer(GR)
  • Mounting plate for corrugated roofs (BA)
  • Inlet protection guard(RA)
  • Service switch
  • Silenced mounting plate (PB)

Special versions:

For further details, feel free to contact KOMPEL Kft.

The post Dynair FC 2V dual-speed centrifugal roof fans with horinzontal discharge appeared first on Dynair.hu.

]]> Dynair MULTIBOX Centralized single flow extract ventilation https://www.dynair.hu/termek/dynair-multibox-centralized-single-flow-extract-ventilation/ Fri, 29 Jun 2018 08:00:10 +0000 http://www.dynair.hu/?post_type=product&p=8678 The MICROBOX series are remarkably thin, centrifugal box fans, suitable for the ventilation of a whole house, featuring 4 intake points. Modular, incredibly compact, and very quiet, ideal for installation in false ceilings. Suitable for conveying clean air up to 50°C.

Principle: The stale air gets extracted from damp areas (kitchen, lavatory, laundry), and fresh air is introduced through the special air intakes.

This product complies with the European Union’s ecodesign directive.

CATALOGUE

The post Dynair MULTIBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

]]> Construction:

  • Casing made from galvanized steel sheet, inside lined with acoustic insulation.
  • IPX4 grade protection.
  • Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
  • Easily accessible motor and impeller for maintenance purposes.
  • Backward curved blade impeller, for low noise and high efficiency operation.
  • Easy installation onto any wall or ceiling, with the provided mounting brackets.
  • Plastic fittings.
  • 4 intake points.

Accessories:

  • RLS 1 WR remote for adjusting ventilation speed (compatible with Multibox EC)
  • RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Multibox 3V)

Available models:

  • Multibox 3V
    • AC motor.
    • 3 speed version with continuous operation at idle speed.
    • Device speed is controllable via the RLS 3V remote (sold separately).
  • Multibox Control
    • AC motor.
    • Device speed is continuously variable between 100 and 246 m3/h, via the new VSD controller.
    • The VSD is included with the device as standard.
  • Multibox EC
    • EC motor.
    • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m3/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MULTIBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

]]> Dynair MICROBOX Centralized single flow extract ventilation https://www.dynair.hu/termek/dynair-microbox-centralized-single-flow-extract-ventilation/ Fri, 29 Jun 2018 07:30:55 +0000 http://www.dynair.hu/?post_type=product&p=8673 The MICROBOX series are remarkably thin, centrifugal box fans, suitable for the ventilation of a whole house, featuring 2 intake points. Modular, incredibly compact, and very quiet, ideal for installation in false ceilings. Suitable for conveying clean air up to 50°C.

Principle: The stale air gets extracted from damp areas (kitchen, lavatory, laundry), and fresh air is introduced through the special air intakes.

This product complies with the European Union’s ecodesign directive.

CATALOGUE

The post Dynair MICROBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

]]> Construction:

  • Casing made from galvanized steel sheet, inside lined with acoustic insulation.
  • IPX4 grade protection.
  • Compliant with the following international standards: EN 60335-2-80 ,  B.T. 2014/35/UE ,  EMC 2014/30/UE .
  • Easily accessible motor and impeller for maintenance purposes.
  • Backward curved blade impeller, for low noise and high efficiency operation.
  • Easy installation onto any wall or ceiling, with the provided mounting brackets.
  • Plastic fittings.
  • 2 intake points.

Accessories:

  • RLS 1 WR remote for adjusting ventilation speed (compatible with Microbox EC)
  • RLS 3V remote for adjusting the ventilation speed and turning the device on/off (compatible with Microbox 3V)

Available models:

  • Microbox 3V
    • AC motor.
    • 3 speed version with continuous operation at idle speed.
    • Device speed is controllable via the RLS 3V remote (sold separately).
  • Microbox Control
    • AC motor.
    • Device speed is continuously variable between 100 and 246 m3/h, via the new VSD controller.
    • The VSD is included with the device as standard.
  • Microbox EC
    • EC motor.
    • Fan speed is controllable via the RLS 1WR remote between 125 and 310 m3/h (remote sold separately).

For further details, feel free to contact KOMPEL Kft.

The post Dynair MICROBOX Centralized single flow extract ventilation appeared first on Dynair.hu.

]]> Dynair REC SanAir Decentralized HRU https://www.dynair.hu/termek/dynair-rec-sanair-decentralized-hru/ Thu, 28 Jun 2018 14:19:58 +0000 http://www.dynair.hu/?post_type=product&p=8667 The REC SanAir series of decentralized heat recovery units provide a thermal efficiency of up to 82%, featuring an enthalpy heat exchanger, designed for residential application. The devices are equipped with a highly effective filtering system, featuring F8 and G4 class filters, allowing the filtration of at least 98% of PM2.5 , 99% of PM10, and 100% of pollens. The device is incredibly thin, with an aesthetically pleasing design, and can be easily mounted onto a wall or window frame, thanks to its light weight. 5 different ventilation levels are available, from 15 to 41 m3/h. Featuring a "free-cooling"  mode (ventilation without heat recovery), and anti-freeze function, this device consumes very little energy (as low as 4W), and operates with an incredibly low noise level.  The REC SanAir also comes with a remote, for setting the ventilation level and the different modes (with a timer up to 10 hours).

This product complies with the European Union’s ecodesign directive.

CATALOGUE

The post Dynair REC SanAir Decentralized HRU appeared first on Dynair.hu.

]]> Available models:

  • REC SanAir WALL
    • Can be installed on any perimeter wall.
    • This unique model is suitable for both vertical or horizontal installation.
    • Easy installation: only 2 holes with 100 mm diameter are necessary.
  • REC SanAir IN WALL
    • Can be installed on any perimeter wall.
    • Built-in design, the device is flush with the wall, suitable for both vertical or horizontal installation.
  • REC SanAir WINDOW
    • Can be mounted on any window frame, up to 180 mm of width and 3000 mm of length.

The exact dimensions can be seen in the catalogue.

For further details, feel free to contact KOMPEL Kft.

The post Dynair REC SanAir Decentralized HRU appeared first on Dynair.hu.

]]>