• Mounting plate made from galvanized steel.
• Inlet protection guard made from micro-stretched galvanized sheet, covered in a weatherproof coating, compliant with EN ISO 12499: 2009 and UNI 80079-37-2016 standards.
• High efficiency, low noise, backward curved blade impeller made from galvanized steel sheet, statically and dynamically balanced statically and dynamically according to ISO 1940 standards.
• Upper cover made from ABS plastic, featuring cooling slots for the motor.
• Motor separated from the airflow path.
• Outer deflector made from ABS plastic (only on FCP-V version)
• Single-, or three-phase asynchronous ATEX motors in B5 standard shape, with IP55 grade protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, ATEX 2014/34/UE, EMC 2014/30/UE, LVD 2014/35/UE. Suitable for continuous “S1” service at constant load.

Accessories:

• Backdraught gravity shutters(TS)
• Silencer(GR)
• Counter base to be walled up (CB)
• Support base for corrugated roofs (BA)
• ATEX service switch
• Acoustically insulated support base(PB)
• Flat protection guard (CCr)

Available upon request:

• IIB+H version (presence of hydrogen)
• 60Hz versions

For further details, feel free to contact KOMPEL Kft.

The post Dynair FCP ATEX – FCP-V ATEX Single-speed centrifugal roof fans appeared first on Dynair.hu.

• Box frame made from extruded aluminium profiles, with removable double layer side panels made out of galvanized steel sheet.
• The insides of the panels are lined with self-extinguishing techno-polymer.
• Double inlet centrifugal fans with forward curved blades, driven by trapezoidal belts, through adjustable pulleys. The fan and motor are supported by a single base frame, separate and insulated from the main structure via anti-vibration mounts and a flexible coupler on the outlet side.
• Asynchronous three-phase ATEX motors, for explosive environments category G group II, thermal class T4, flame protection EX D. Equipped with IP55 grade protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Suitable for continuous „S1” operation at constant load. Available in B3 or B5 standard shapes, with ATEX certification by the pertaining authorities.

Accessories:

• Weatherproof cover
• Support feet
• Outlet terminal with guard
• Setting shutter
• Serivce switch IP65
• ATEX service switch

Available upon request:

• Three-phase, double polarity ATEX motor version (4/6 poles), with same characteristics as the standard version.
• Aynchronous, single-phase ATEX motors, with same characteristics as the standard version.
• ATEX II3GD certified version.
• Aluminium panels.
• Double layered panels in 23 or 50mm thickness.

The post Dynair BOX-T ATEX Belt driven double inlet box fans appeared first on Dynair.hu.

• Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
• Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
• Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
• For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
• Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).
• Three-phase asynchronous motors, with IP55 grade protection, class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load, available in B3 or B5 standard shapes.

Accessoreies:

• Condensation drain hole (TS)
• Inspection door (PI)
• Inlet counter flange(CFA)
• Outlet counter flange(CFP)
• Inlet protection guard(RA)
• Outlet protection guard(RP)
• Inlet flexible connector(GA)
• Outlet flexible connector(GP)
• Inlet vane control
• Outlet setting shutter
• Anti-vibration mounts

Special versions:

• Corrosion resistant version, featuring an AISI 304 stainles steel casing, inlet and impeller
  • • • (See:Anticorrosion fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair PQ-L ATEX Backward curved blade centrifugal fans appeared first on Dynair.hu.

• Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
• Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
• Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
• For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
• Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).
• Three-phase asynchronous motors, with IP55 grade protection, class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load, available in B3 or B5 standard shapes.

Accessoreies:

• Condensation drain hole (TS)
• Inspection door (PI)
• Inlet counter flange(CFA)
• Outlet counter flange(CFP)
• Inlet protection guard(RA)
• Outlet protection guard(RP)
• Inlet flexible connector(GA)
• Outlet flexible connector(GP)
• Inlet vane control
• Outlet setting shutter
• Anti-vibration mounts

Special versions:

• Corrosion resistant version, featuring an AISI 304 stainles steel casing, inlet and impeller
  • • • (See:Anticorrosion fans)
• High temperature version, suitable for conveying hot gases (up to 150°C or 300°C)
  • • • (See:High temperature fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair PS-L ATEX Backward curved blade centrifugal fans for dusty air appeared first on Dynair.hu.

• Volute casing made out of steel sheet, protected against atmospheric agenty by epoxy paint.
• Aerodynamically shaped inlet cone, made from steel sheet, covered in epoxy paint.
• Single inlet, high efficiency  backward-curved steel impeller. Class 3 versions are suited for operation at high speed.
• For executions 1,9,12, a cast iron mono-block support is used, with ball bearings, designed for easy lubrication. Pulleys, belts, motor support and belt protection guard supplied as standard.
• Asynchronous three-phase motor, with IP55 protection, Class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004=108/CE, LVD 2006/95/CE. Suitable for S1 service (continuous operation at constant load).
• Three-phase asynchronous motors, with IP55 grade protection, class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load, available in B3 or B5 standard shapes.

Accessoreies:

• Condensation drain hole (TS)
• Inspection door (PI)
• Inlet counter flange(CFA)
• Outlet counter flange(CFP)
• Inlet protection guard(RA)
• Outlet protection guard(RP)
• Inlet flexible connector(GA)
• Outlet flexible connector(GP)
• Inlet vane control
• Outlet setting shutter
• Anti-vibration mounts

Special versions:

• Corrosion resistant version, featuring an AISI 304 stainles steel casing, inlet and impeller
  • • • (See:Anticorrosion fans)
• High temperature version, suitable for conveying hot gases (up to 150°C or 300°C)
  • • • (See:High temperature fans)

For further details, feel free to contact KOMPEL Kft.

The post Dynair PR-L ATEX Backward curved blade centrifugal fans for clean or slightly dusty air appeared first on Dynair.hu.

• Mounting plate made from galvanized steel.
• Inlet protection guard made from steel rods, covered in a weatherproof coating, all according to UNI 12499 regulations.
• High efficiency, low noise, backward curved blade impeller made from galvanized steel sheet, statically and dynamically balanced statically and dynamically according to ISO 1940 standards.
• Upper cover made from ABS plastic, featuring cooling slots for the motor.
• Motor separated from the airflow path.
• Outer deflector made from ABS plastic (only on FC-V version)
• Single-, or three-phase asynchronous motors, with IP55 grade protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load.

Accessories:

• Backdraught gravity shutters(TS)
• Silencer(GR)
• Counter base to be walled up (CB)
• Support base for corrugated roofs (BA)
• Inlet protection guard(RA)
• ATEX service switch
• Acoustically insulated support base(PB)
• Flat protection guard (CCr)

Available upon request:

• Versions for different temperature ranges.
• Motors suitable for different environments.
• Motors suitable for speed regulation.
• Double polarity motors.
• Aluminium cover instead of ABS plastic.

For further details, feel free to contact KOMPEL Kft.

The post Dynair FC – FCV ATEX Single-speed centrifugal roof fans appeared first on Dynair.hu.

• Volute casing made from folded steel sheet, covered in epoxy paint.
• Single inlet, single width, forward curved impeller, coupled directly to the motor, made out of galvanized steel sheet (models 200-315) or steel sheet with welded blades painted in epoxy( models 355-450).
• Brass inlet on IIC execution models, and steel inlet covered in epoxy on IIB models.
• Standard orientation: LG 270°

Motor:

• Single-, or three-phase asynchronous motors, with IP55 or IP65 grade protection, class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load.

Accessories:

• Inlet and outlet protection guard, manufactured according to UNI 12499 standards, with weatherproof coating.
• Round inlet cone, made from steel sheet, coated in epoxy.

Available upon request:

• Double polarity motors.
• Versions suited for different temperature ranges,
• with motors suited for different environments,
• with motors suitable for speed regulation.

Installation:

• Centrifugal fans with forward curved blades must always be installed into ducted systems, with adeqaute resistance (e.g. setting shutters), so the airflow limits the drawn current to the value specified by the motor rating label.

The post Dynair AL-ATEX Forward curved blade centrifugal fans appeared first on Dynair.hu.

• Volute casing in steel sheet, protected by epoxy paint, or in AISI304 stainless steel (INOX version).
• Single inlet, single width forward curved impeller, made from galvanized steel, or AISI304 stainless steel (INOX version). Impeller coupled directly to the motor, with motor completely separated from the airflow path.
• Steel inlet with epoxy finish, or INOX stainless steel inlet on IIB execution models, while the IIC execution models feature a brass inlet. Standard orientation is LG 270°, with inlet connector supplied as standard (not assembled).
• Single-, or three-phase asynchronous motors, with IP55 grade protection, and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load.

Available upon request:  

• Versions suited for different temperature ranges.
• motors suited for different environments.
• motors suitable for speed regulation.

For further details, feel free to contact KOMPEL Kft.

The post Dynair DIC-ATEX – DIC-INOX-ATEX Forward curved blade centrifugal fans appeared first on Dynair.hu.

• Mounting frame made from drawn steel sheet, with a wide radius inlet cone.
• Impeller with aerofoil blades made from fiberglass-reinforced plastic, featuring a die-cast aluminium hub, all balanced according to ISO 1940 standards.
• Impeller coupled directly to the motor, with airflow from motor to impeller.
• Inlet protection guard made from steel rods, covered in a weatherproof coating, all according to UNI 12499 regulations.
• Single-, or three-phase asynchronous motors, with IP55 grade protection and class F insulation, CE marked, compliant with the following standards: IEC 60034, IEC 60072, EMC 2004/108/Ce, LVD 2006/95/CE.  ATEX certification for explosive environments cat.G group II, thermal class T4, flame protection EX D. Suitable for continuous S1 service at constant load.

Accessories:

• Gravity shutter (S).
• Spacer manufactured from steel sheet, painted in epoxy (D).
• Impeller side protection guard, manufactured according to UNI ISO 12499 regulations, and protected against atmospheric agents (R).
• ATEX service switch.

Available upon request:

• Airflow from impeller to motor.
• Versions for different temperature ranges.
• Motors suited for different atmospheres.
• Motors suitable for speed regulation.
• Double polarity motors.

The post Dynair QCM-ATX Plate mounted axial fans appeared first on Dynair.hu.

• Short casing made out of steel sheet, with fixing flanges manufactured according to the UNI-ISO 6580 EUROVENT standard. Protected against atmospheric agents by epoxy paint.
• Axial impeller with aerofoil profile blades made from glass reinforced antistatic plyamide with a die-cast aluminium hub, balanced according to  ISO 1940.  Pitch angle of the blades can be varied, when the fan is off.
• Impeller and sparkproof protective ring made out of aluminium, according to the chosen construction, with the impeller coupled directly to motor,with airflow from motor to impeller.
• Asynchronous single-, or three-phase motors, CE marked ,with IP 55 grade protection and class F insulation, CE marked, compliant with international standards IEC 60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE.  ATEX certified for explosive enivronments in category G, group II, thermal class T4, flame protection EX D. Suitable for continuous „S1” service at constant load.

Accessories:

• Extension (for long casing version) with inspection porthole (CCpro)
• Flat protection guard (CCr)
• Conic protection guard (CCrc)
• Flexible connectors (CCga)
• Support feet (CCst)
• Inlet/outlet bell mouth (CCbo)
• Silencers, with and without pod, in three lengths (CCsa and CCsb)
• Flat counter flange (Ccf)
• Counter flange with collar (CCfc)
• Anti-vibration mounts.
• External ATEX terminal box.
• ATEX service switch.

Available upon request:

• Versions suited for different temperature ranges.
• Versions with motors suited for different environments.
• motors suitable for speed regulation.
• double polarity motors.

For further details, feel free to contact KOMPEL Kft.

The post Dynair CC ATEX Ducted axial fan appeared first on Dynair.hu.